Fastener
Home Up

 

Description Posted by Size Thumbnail
Hex Head, Coarse UNC Machine Screws to 1-1/2 Inch C Bliss 110K wpe1.jpg (2032 bytes)
Hex Head, Fine UNF Machine Screws 1/4" to 1-1/2 Inch C Bliss 109K wpe4.jpg (2291 bytes)
88 Nuts, Includes: Normal and Heavy Nuts,  Normal and Heavy Jam Nuts, . Sizes from 1/4" to 1-1/2" Course and Fine Thread Sean Dotson

 

98K wpe2.jpg (2406 bytes)
60 Machine Nuts from 0-80 to 3/8", Fine and Course Thread, Square / Hex, single and double chamfer (updated 7-25-02). Sean Dotson
+ Karl Mass
85K wpe4.jpg (2366 bytes)
Large Hex Nuts, Heavy and Jam
UN, UNS and UNC threads
from 1 5/8" to 4"
90 Nuts Total
Larry Caldwell 107K wpe4.jpg (2645 bytes)
Castle and Slotted Nuts, UNC-UNF, 1/4" to 1-1/2", 88 sizes in all. Phil Argabrite 119K wpe1.jpg (2783 bytes)
Flex Lock Nut, 8-32 to 2"-12, 32 sizes, UNC, UNF, UN & UNS Jerry R. Payton 179K wpe2.jpg (2936 bytes)
Acorn Nuts, Inch, 24 sizes from #6 to 1 1/4" Sean Dotson
113K wpe2.jpg (2931 bytes)
NyLock Nut, Inch, Standard and Narrow, 58 sizes, #4 to 1 1/2", UNC and UNF Quinn Zander 126K wpe4.jpg (2884 bytes)
Whiz Nuts, 16 sizes #6 to 3/4 UNC and UNF Chris Williams 108K wpe5.jpg (2947 bytes)
Alan Nuts, UNC & UNF, 4-40 to 1",
28 sizes
Cory McConnell 134K wpe8.jpg (2498 bytes)
Copuling Nuts, Course and Fine, Inch, #4 to 1",   21 Nuts total. Quinn Zander 130K wpe4.jpg (2563 bytes)
ANSI A & B Washers, Normal, Regular and Wide.  Helical Lock Washers. Three files included, Inch
(Replaced Lock Washer 4/6/01)
Stephen P. Spinney 193K wpe4.jpg (3785 bytes)
AN960 Steel Washers, #2 to 3/8", (R10) Brian Foreman 68K wpe3.jpg (2372 bytes)
MS15795 Steel Washers, #0 to 1", (R10) Brian Foreman 68K wpe4.jpg (2416 bytes)
Counter Sinked Washers, #4 to 1/4" (R8) Cory McConnell 143K
wpe2.jpg (1623 bytes)
wpe1.jpg (2684 bytes)
ANSI/ASME B18.21.1-1994, Internal and External Lockwashers, #2 to 1-1/4
86 to choose from
Ken Mueller 110K
wpe2.jpg (1623 bytes)
wpe1.jpg (3626 bytes)
KEP Nuts, #4 to 3/8", UNF and UNC Miles Ivaska 162K wpe1.jpg (2887 bytes)
Bellville Washer (cupped), 142 sizes, ,093" to 2" ID Cory McConnell 94K wpe1.jpg (2170 bytes)
Bellville Metric Washer (cupped). wpe2.jpg (2506 bytes)
Wave Spring Washer, 1/4" to 1" nominal ID, 48 sizes (R8) Cory McConnell 122K
wpe2.jpg (1623 bytes)
wpe10.jpg (2408 bytes)
Wave Washer, .134 to 5.96", slightly flat for constraining, steel and stainless, 49 sizes  (R7) Bill Howe 98K
wpe2.jpg (1623 bytes)
wpe3.jpg (2005 bytes)
Spirolox RSN Retaining Ring, 107 Sizes from .443" ID to 14.363" ID John Muchow 165K wpe2.jpg (2409 bytes)
Douglas Stamping Washer, Round FSC and "D" DSC, 68 Sizes, .21" to 1" bore Jason McNamara 53K wpe8.jpg (2020 bytes)
Chicago Hardware Bevel Washer,1/4" to 1-1/4",10 Sizes (R8) Cory McConnell 72K
wpe2.jpg (1623 bytes)
wpeF.jpg (2009 bytes)
Bearing retainer nuts, NE series, 16 sizes from N-00 to AN-15.  Some of the threads were fudged to match Thread.xls values.   Correct me if I am wrong. Ole Germer 84K wpe1.jpg (2387 bytes)
Whittet-Higgins W series Bearing retainer locking washer.  33 sizes from W-00 to W-44 Monty Montgomery

 

144K wpe2.jpg (2226 bytes)
Metric Safety-Lock Nut, 10-100mm, 17 Sizes Hanspeter Schweizer 119K
wpe2.jpg (1623 bytes)
wpe1.jpg (3761 bytes)
Phillips, Pan Head, Inch Machine screw 2-56 to 3/8-16.  Cataloged length with threads C Bliss 130K wpe1.jpg (2831 bytes)
Pan Head, Slotted, 148 Sizes, 2-56 to 1/2". C Bliss
Don Richards
103K wpe2.jpg (2940 bytes)
Button Head, Inch. 2 files, Hex and Torx. UNC and UNF.  195 Sizes C Bliss
Mike Magill
260K wpe2.jpg (3861 bytes)
Button Head Hex socket, Metric, 146 sizes, 3mm to 12mm dia, Steel and Stainless Ron Crain 114K wpe4.jpg (2315 bytes)
Flanged Button Head Screw, 6-32 to 3/8-16.  28 sizes Mike Maxwell 95K wpe1.jpg (2852 bytes)
Plastite Pan Head Torx machine screws,
53 sizes from #00 to 1/4"
Ron Crain 125K wpe1.jpg (2467 bytes)
Flat Head Machine Screw, Phillips, Inch, from 2-56 to 1/2-13 UNC,  113 Sizes Chris Williams
FKI Logistex
85Kwpe2.jpg (1623 bytes) wpe8.jpg (2302 bytes)
As above but "fixed" and in R8 format
Flat Head Machine Screw, Phillips, Inch, from 2-56 to 1/2-13 UNC,  113 Sizes
Chris Williams
FKI Logistex
90K wpe8.jpg (2302 bytes)
Flat Head Machine Screw, 82deg, 2-56 to 3/8", three materials, lengths to 6" w/undercuts , McMaster Carr part numbers. (R8)
329 sizes
Peter Kieselbach 133K
wpe2.jpg (1623 bytes)
wpe1.jpg (2488 bytes)
Flat Head Machine Screw, Slotted, Inch, from 2-56 to 3/4-10 UNC
Steel and Brass (R8)
Kirk Arthur 157K wpe1.jpg (2528 bytes)
Round Head Machine Screw, Slotted, Inch, from 2-56 to 1/2-13 UNC,  153 Size Chris Williams
FKI Logistex
85Kwpe2.jpg (1623 bytes) wpeA.jpg (2481 bytes)
Fillister Head, Inch, Plain and Drilled, #0000 to 3/8", 338 sizes to choose from. John Muchow 165K wpe2.jpg (2635 bytes)
Socket Head Cap Screws, Coarse UNC   3-40 to 1 Inch
243 to choose from
Neil Munro 88K wpe1.jpg (2554 bytes)
Socket Head Cap Screws, 243 UNC and 243 UNF to choose from, Two files included in Zip. Sizes from #4 to 1"
(replaced UNC 3/27/01)
Neil Munro &
Sean Dotson
223K wpe2.jpg (2425 bytes)
Metric Cap Screws, M1 to M24, 238 sizes to choose from
(replaced UNC 6/14/01)
Sean Dotson 100K wpe4.jpg (2277 bytes)
Lowhead Cap Screws, 104 part, 2 files, #6 to 1/2" UNC and UNF Sean Dotson 186K wpe6.jpg (2348 bytes)
Lowhead Metric Cap Screw, 3mm to 20mm, 63 sizes. Chris Pape 100k wpe8.jpg (2495 bytes)
12 Point Cap Screw, 421 sizes, 1/4" to 1-3/4", varying lengths, UNC John Muchow 133Kwpe2.jpg (1623 bytes) wpe4.jpg (2610 bytes)
Metric Flat Head Screws, M3 to M20, 199 sizes to choose from Sean Dotson 101K wpe5.jpg (2446 bytes)
Shoulder Bolts, Inch, 110 sizes, 1/4" to 2" Diameters, Scott Braun 111K wpe1.jpg (2263 bytes)
WM Berg shoulder bolts, shoulder size from 1/8" to 1/2", 45 sizes to choose from. Ron Crain 100K wpe2.jpg (2526 bytes)
Metric Shoulder Bolts, 6mm to 24mm, 96 sizes
(updated 3/1/01)
Peter Damgaard 116K wpe2.jpg (2105 bytes)
Carriage Bolt, #10 to 1", UNC, 145 Sizes Milt Schuepfer 138K wpe8.jpg (2247 bytes)
Carriage Bolt, 1/4" to 1", UNC, 264 Size Diana Trapsa 146K wpeA.jpg (2180 bytes)
FlatHead, Inch, 2 files, UNC & UNF, #4 to 3/4", 207 UNF sizes and 207 UNC sizes Sean Dotson
221K wpe4.jpg (2448 bytes)
Inch Set Screws, 306 sizes from 2-56 UNC to 1-8 UNF (replaced 12/02/01) Sean Dotson
121K wpe22.jpg (2130 bytes)
Square Head Cup Point Set Screw, 10-24 to 1-1/2", 59 sizes John Muchow 122K wpe2.jpg (2355 bytes)
Brass Tip Inch Set screws Alan Rennick
(derived from Sean Dotson's above)
109K wpe5.jpg (2525 bytes)
Wedge Anchors, Inch, 1/4" to 1", 37 sizes (R8) Kirk Arthur 104K wpe2.jpg (2337 bytes)
Lag Bolt, American National Standard #10 to 1 1/4", Hex Head, 72 sizes Milt Schuepfer 126K
wpe2.jpg (1623 bytes)
wpe5.jpg (2697 bytes)
Lag Bolt, American National Standard #10 to 1 1/4", Square Head, 72 sizes Milt Schuepfer 120K
wpe2.jpg (1623 bytes)
wpe6.jpg (2390 bytes)
Bugle Head Drywall & Decking Screws,
#6 - #10, 1" to 6" long, 42 sizes
Alan Rennick 135Kwpe2.jpg (1623 bytes) wpe2.jpg (2048 bytes)
Wood Screw, Round Head, Philips
Size# 4,5,6,8,9,10,12,14
85 Sizes, (R10)
Josh Petitt 248K wpe3.jpg (2347 bytes)
Wood Screw, Round Head, Slotted
Size# 4,5,6,8,9,10,12,14
85 Sizes, (R10)
Josh Petitt 228K wpe5.jpg (2176 bytes)
Wood Screw, Oval Head, Philips
Size# 4,5,6,8,9,10,12,14
85 Sizes, (R10)
Josh Petitt 261K wpe6.jpg (2287 bytes)
Wood Screw, Oval Head, Slotted
Size# 4,5,6,8,9,10,12,14
85 Sizes, (R10)
Josh Petitt 242K wpeD.jpg (2243 bytes)
Wood Screw, Flat Head, Philips
Size# 4,5,6,7,8,9,10,12,14
91 Sizes, (R10)
Josh Petitt 242k wpeF.jpg (2251 bytes)
Wood Screw, Flat Head, Slotted
Size# 4,5,6,7,8,9,10,12,14
91 Sizes, (R10)
Josh Petitt 227K wpe10.jpg (2216 bytes)
T-Nuts, 6 sizes from 1/4" to 5/8" Dave Hoder 59Kwpe2.jpg (1623 bytes) wpe2.jpg (2439 bytes)
DrivLok Grooved Pin, Type G, 203 sizes, 3/32-1/2" Diameters, Lengths to 4 1/2" James Gralinski 102K
wpe2.jpg (1623 bytes)
wpe4.jpg (2083 bytes)
Thumb Screw,  6-32 UNC to 1/2-13 UNC, 49 sizes. John Muchow 80K
wpe2.jpg (1623 bytes)
wpe4.jpg (2290 bytes)
Plastic Head Thumb Screw, 66 sizes #4-40 to 5/16", UNC & UNF Richard Cook 88K
wpe2.jpg (1623 bytes)
wpe2.jpg (2567 bytes)
Stamped Wing Nuts, Inch, 6-32 to 3/8.  Approximates ANSI sizes from 3 different families.  Can be slow to calculate C Bliss 82K
wpe2.jpg (1623 bytes)
wpe1.jpg (2776 bytes)
Forged Wing Nut, ANSI   B18.17-1968,R1975, 53 sizes, #3 to 3/4" UNC & UNF Sean Thompson 140K
wpe2.jpg (1623 bytes)
wpe1.jpg (2309 bytes)
PEM Library, Inch, 1243 parts, Type F, SP, BSO, CL, FH, FLH, SO, TSO Ron Crain
Phil Agrabrite
1M wpe1.jpg (4181 bytes)
PEM Library, Metric, 919 parts, Type F, FHL, BSO, CL, FH, SO, SP, TSO Ron Crain
Phil Agrabrite
1M wpe1.jpg (4181 bytes)
PEM Library, Inch, 407 parts, Types CLA, CLS, FHA, FHS, S, SOA, SOS, PF30, Atlas AEL John Hunter 722K wpe1.jpg (3469 bytes)
PEM type F, 13 sizes, 2 variations, 2-56 to 1/4-20  Configurations with and without iMates Andy Mckenna 123K wpe8.jpg (3005 bytes)
PEM Flush Self-Clinching Fastener
(Type f), 13 sizes, 2-56 to 1/4-20
Hal Gwin 100K wpe8.jpg (1999 bytes)
PEM Nuts, Inch, 132 sizes, 4 materials, 2-56 to 1/2"
(replaced 3/1/01)
Brian D. Verboort 98K wpe2.jpg (3156 bytes)
PEM Nuts, Inch, 132 sizes, 4 materials, 2-56 to 1/2" updated to R5 with iMate
Brian D. Verboort 100K wpe4.jpg (3021 bytes)
PEM Blind nut, 20 sizes, 4-40 to 1/4-20 Hal Gwin 114K wpe8.jpg (2465 bytes)
PEM Pilot Pin Flush Head Stud, FPS Inch and Metric. 3mm - 6mm   ,1/8" - .25", 28 sizes Hal Gwin 70K wpe1.jpg (1995 bytes)
PEM Style B, Metric Blind,3mm to 6mm, Steel and Stainless, 16 sizes, (R9) Bill Howe 146k wpe3.jpg (2208 bytes)
PEM Standoffs, Inch, 156 sizes, 3 materials, 4-40 to 10-32,  R5 with iMate
Brian D. Verboort 137K wpe5.jpg (2247 bytes)
PEM Studs, Inch, 67 sizes, 2-56 to 5/16", various lengths, FH series. Mike Maenpaa 69K wpe2.jpg (2752 bytes)
PEM Snap Top Standoff, .156 dia, lengths from 3/16 to 1-1/16 Miles Ivaska 128K wpe2.jpg (2222 bytes)
Keenserts, Inch, 92 Heavyweight #8 to 1", 48 Lightweight #10 to 1/2" and 22 Miniature #0 to #8 (added Heavyweight 4/1/01) Michael (Nyi Oo) Myo 294K wpe2.jpg (3470 bytes)
HeliCoil, 420 parts, #2 - 1-1/2", 1191, 3591, 1185, 3583 Series. (External Threads require Included Spread sheet to be merged into your Threads.xls) Curt Fitzwater 570K wpe2.jpg (2637 bytes)
HeliCoil, 420 parts, #2 - 1-1/2", 1191, 3591, 1185, 3583 Series. (No External Threads) Curt Fitzwater 460K wpe1.jpg (2133 bytes)
Helicoil, Metric, 115 Locking and 115 non-locking,M2 to M39
Includes Metric Helicoil Spread Sheet to be merged into Threads.xls
Phil Argabrite 299K wpe3.jpg (2486 bytes)
Ultrasert I, 12 sizes, Inch and Metric, 4-40 to 1/4" & 3mm to 6mm Ron Crain 146K wpe2.jpg (2858 bytes)
Ultrasert II, 44 sizes, Inch and Metric, 0-80 to 3/8" & 2mm to 10mm Ron Crain 133K wpe3.jpg (2708 bytes)
Pop Rivits, Inch, 102 Domed, 21 Countersunk, 3/32" to 1/4" Quinn Zander 249K PopRivit (2595 bytes)
Drive Screws, 180 sizes from #00 to #14, Steel and Stainless Cory McConnell 162K wpe2.jpg (2543 bytes)
Captive Panel Screw, 4-40 UNC & 6-32 UNC, 15 sizes (R7) Cory McConnell 87K
wpe2.jpg (1623 bytes)
wpe3.jpg (2198 bytes)

 

THIS WEBSITE IS PROVIDED "AS IS" AND NO WARRANTY, EXPRESS OR IMPLIED, IS MADE WITH RESPECT TO THIS WEBSITE OR ANY CONTENT ON THIS WEBSITE.

©1999-2013 Charles Bliss.
All Rights Reserved